Drawer Side Blanks
Although designed with the professional in mind, drawer side blanks have been embraced by the serious hobbyist as well. These eight foot strips of prefinished Maple, complete with edge treatment and a kerf to accept a 1/4" drawer bottom make building drawers a snap. Drawer heights from 2" to 12 " are available. Eight different heights come in one of two basic configurations, both of which are 1/2" wide plywood construction.

Bullnosed ApplePly‚ drawer sides have a rounded plywood top edge finished to match the Maple face and back veneers.

Edge banded drawer sides have a flat maple edge banded top edge finished to match the Maple face and back veneers.

Both configurations include a 1/4" X 1/4" kerf, 5/8" from the bottom edge that allows mounting of the newer concealed slides as well as conventional slides.

Standard sizes are
2." X 96"
3.5" X 96"
4." X 96"
5." X 96"
6." X 96"
8." X 96"
10." X 96"
12." X 96"

For a list of distributors stocking States’ drawer side click here.

<< back